Features
Fixed
- Add I2C function
- When you connect the USB, the receiver and OSD settings can be saved
- Increase the pad area
- LED signal selection （when Mamba Led sys avaiable）
- BEC short circuit protection
- TVS instant high voltage protection 30V
Update
- F405 models support F.prot（Most）
- Upgrade the anti-interference cable
- Use Typec（Most）
- The pad area of Mini flight controller (20×20) increased by 140%
Added
- Add self-recovery insurance to the receiver's 5V power supply
- Increase the camera VCC power supply pad
- Standard flight controller (30.5×30.5) adds spare pad
- Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference
Specifications
MAMBA Basic F405MK3
- MCU: 168MHz STM32F45RGT6
- GYRO: MPU6000
- Barometer: Yes
- OSD: Yes
- Blackbox: 16M Flash Memory
- Uarts: 6Set
- ESC Soft: Dshot300/600
- ESC Telemetry: Yes
- Power Led: Yes
- LED Controller: BF LED/MB LED（4 Set 2812 LED）
- S/F.Port: Yes
- RSSI: Yes
- Buzz: Yes
- Input: 3~6S Lipo (12.6~25.2V)
- TVS Protection: Yes
- BEC:3.3V 0.5A& 5V 3A ( (System Power)&5V 3A(LED)& 9V 3A
- MOUNTING: 30.5mm, M3
MAMBA F50
- INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
- CONTINUE CURRENT:50A×4
- BURST CURRENT:60A (10S)
- BEC: No
- Target：BLHeli_S CH40
- SOFT: Dshot300/600
- TVS Protection: Yes
- MOUNTING: 30.5mm/M3
Includes
- High-Frequency 470uF/35V ×1
-
8pin sh1.0 ×2
- 12AWG 100mm ×2
-
AMASS Original XT60
Resources
Diatone diagram and help centre link
