Introduce the Bassline , inspired from Our team pilot Nathan Loopz
This idea was originally born in 2019, and today we make it into a BNF. Even though we have many excellent Micro Freestyle drones now days, but the Bassline’s performance is still the craziest.
Specifications
- Brand Name: Happymodel
- Item Name: Bassline 2S 2inch Micro FPV toothpick drone
- Frame wheelbase: 90mm
- Analog Version Weight: 40 gram without battery
- Size: 115mm*115mm*40mm
- Receiver option: SPI ELRS 2.4GHz
FC Specifications
- X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: ICM20689 or ICM42688P(SPI connection)
- Mount hole size: 25.5mm*25.5mm
- Power supply: 1-2S battery input (DC 2.9V-8.7V)
- Built-in 12A(each) Blheli_S 4in1 ESC
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G OpenVTX 0mw~400mw
- Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A
- Built-in voltage detection
- Built-in current sensor
ESC Specifications
- Power supply: 1-2S LiPo/LiPo HV
- Current: 12A continuous peak 15A (3 seconds)
- Support BLHeliSuite programmable
- Default Factory firmware: Z_H_30_REV16_7.HEX
- Default protocol: DSHOT300
- Support Bluejay firmware
ELRS Specifications
- Packet Rate option: 50Hz/150Hz/250Hz/500Hz
- ExpressLRS Firmware version: V2.0
- RF Frequency: 2.4GHz
- Antenna : SMD antenna
- Telemetry output Power: <12dBm
- Receiver protocol: SPI ExpressLRS
- Compatible with ExpressLRS V2.0 TX Module
- Couldn’t flash separately ExpressLRS firmware
- Could flash FC firmware to support ExpressLRS v3.0 TX module
Motor Specifications
- Mode: EX1103 KV11000
- Configu-ration:9N12P
- Stator Diamter:11mm
- Stator Length:3mm
- Shaft Diameter:Φ1.5mm
- Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm
- Weight(g):3.8g
- No.of Cells(Lipo):1-2S
Prop Specifications
- Model: Gemfan 2023
- Weight:0.88g
- Material: PC
- Pitch:2.3inch
- Props Dia:52.17mm
- Center Thickness:5mm
- Center Hole Dia:1.5mm
Camera Specifications
- Model: Caddx ANT 1200tvl camera
- Image Sensor: 1/3″ CMOS Sensor
- Horizontal Resolution: 1200 TVL
- TV System: NTSC or PAL
- IMAGE: 16:9 or 4:3
- Synchronization: Internal
- Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
- S/N Ratio : >52dB (AGC OFF)
- Video Output: CVBS
- Lens: 1.8mm
- Min. Illumination: 0.001Lux@F1.2
- Auto Gain Control: YES
- WDR: Global WDR
- DNR: 3D DNR
- Dimensions: 14*14mm(with bracket to 19*19mm)
- Wide Power Input: DC 3.7-18V
- Weight: 2g (N.W.)
VTX Specifications
- Firmware version: OPENVTX
- Smartaudio v2.1
- PIT Mode support
- RCE Mode support
- Channels:48ch
- Transmitting Power: 0/RCE/25mw/100mw/400mw
- Power supply: DC 5V
- Current (5v): <650ma (400mw)
Package
- 1 x Happymodel Bassline 2S 2" Micro Drone X12 ELRS V2.1 flight controller built-in SPI ELRS 2.4G receiver
- 1 x Gemfan toothpick 2023 tri-blade propellers(4cw+4ccw)
- 1 x Screwdriver
https://youtu.be/zIsrFydokjs
