The immensely popular X-AIR for DJI FPV is redesigned in this new, more compact, version. Same great performances with much less footprint. Easier to pack-up when mounted and allowing more up tilt angle.
The X-AIR MK II for DJI install on the two left or right antenna ports in either vertical or horizontal position. The horizontal position allows up to 80deg up tilt so even if you tend to look at the ground while flying, you can keep the antenna aiming forward.
Gain: 9.5-10.5 dBic
Polarization: RHCP or LHCP
Beam-width*: 120deg 1
Beam-width @-3dB**: 68deg. ‘
Connector: SMA male
Dimension: 32 x 72 x 16mm
- Include all hardware to mount on DJI FPV goggles.
*Coverage where reception is at least equivalent to an omni.
**Coverage where at least 70% of the max range is obtained.
- 1 x X-AIR 5.8 MK II for DJI FPV
The stock DJI air unit antennas are LHCP. Mixing the stock LHCP antennas with a RHCP goggle antenna will decrease your range and performance. Please ensure your goggle antenna polarization matches your DJI air unit antenna polarization.
(ex. if you plan to use a X-AIR 5.8 for DJI RHCP you need to install RHCP antennas on your air unit)
(ex. if you plan to use a X-Air for DJI LHCP you need to install LHCP antennas on your air unit)