Features
Fixed
- Add I2C function
- When you connect the USB, the receiver and OSD settings can be saved
- Increase the pad area
- LED signal selection (when Mamba Led sys avaiable)
- BEC short circuit protection
- TVS instant high voltage protection 30V
Update
- F405 models support F.prot(Most)
- Upgrade the anti-interference cable
- Use Typec(Most)
- The pad area of Mini flight controller (20×20) increased by 140%
Added
- Add self-recovery insurance to the receiver's 5V power supply
- Increase the camera VCC power supply pad
- Standard flight controller (30.5×30.5) adds spare pad
- Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference
Specifications
MAMBA Basic F405MINI MK3.5
MCU: 168MHz STM32F405RGT6
GYRO: MPU6000
Barometer: Yes
OSD: Yes
Blackbox: 16M Flash Memory
Uarts: 5 Set
ESC Soft: Dshot300/600
Power Led: Yes
LED Controller: BF LED
RSSI: Yes
Buzz: Yes
Input: 2~6S Lipo (8.4~25.2V)
TVS Protection: Yes
BEC:3.3V 0.5A& 5V 2.5A
MOUNTING: 20mm, M2
MAMBA F40_BLS MINI
INPUT VOLTAGE: 2~6S Lipo (8.4V~25V)
CONTINUE CURRENT: 40A×4
BURST CURRENT: 45A (10S)
BEC: No
Target:BLHeli_S CH40
SOFT: Dshot300/600
TVS Protection: Yes
MOUNTING: 20mm, M3/M2
Includes
- High-Frequency 470uF/35V ×1
- 8pin sh1.0 ×2
- 16AWG 60mm ×2
-
AMASS Original XT60
Resources
Diatone diagram and help centre link