The Happymodel Moblite 7 HDZero Whoop is a 75mm HD brushless whoop weighing just 29.5 grams. It features the HDZero Whoop Lite VTX and Nano Camera and built-in SPI ELRS 2.4GHz or FrSky 2.4GHz receiver. With powerful EX1002 KV20000 motors, and Superbee F4 Lite flight controller, this should be a great performing high-definition whoop you can fly just about anywhere.
Specifications
- Brand Name: Happymodel
- Model: Moblite7 HDZERO
- Frame wheelbase: 75mm
- Weight: 29.5 gram without battery
- Size: 98mm*98mm*50mm
- Receiver option: SPI ELRS 2.4GHz
- Compatible with 1S Lipo battery or Lihv battery
- Battery Plug: PH2.0
FC Specifications
- SPI ELRS version Firmware target: CrazybeeF4SX1280
- MCU:STM32F411CEU6 (100MHz, 512K FLASH)
- Sensor: ICM20689 or ICM42688P or BMI270(SPI connection)
- Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V)
- Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
- Built-in Betaflight OSD(SPI Control)
- Built-in SPI ExpressLRS receiver
- Built-in 5V 1A BEC
- Built-in voltage detection
ESC Specifications
- MCU upgraded to EFM8BB21
- Power supply: 1S LiPo/LiPo HV (2.8v~4.35v)
- Currents: 5A continuous peak 6A (5 seconds)
- Support BLHeliSuite programmable
- Factory firmware: O_H_5_REV16_8.HEX
- Default protocol: DSHOT150/DSHOT300/DSHOT600
ELRS Specifications
- Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
- RF Frequency: 2.4GHz
- Telemetry output Power: <12dBm
- Receiver protocol: SPI ExpressLRS
- Could bind with ELRS V2.0 firmware TX module
Motor Specifications
- Model: EX1002 20000KV
- Configu-ration:9N12P
- Stator Diameter:10mm
- Stator Length:2mm
- Shaft Diameter:Φ1.5mm
- Motor Dimension(Dia.*Len):Φ13.5mm*12.5mm
- Weight(g):2.5g
- No.of Cells(Lipo):1S only
Prop Specifications
Camera Specifications
- Model: HDZero Nano Lite Camera
- 14x16x11 mm
- 1.5gram
- 0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor
- Excellent low light performance
- Fov:
4:3: D:130° H:108° v:84°
16:9:D:122° H:108° V:65°
VTX Specifications
- Model: HDZero Whoop Lite VTX
- 1S Input
- 25mW/200mW RF Output-SmartAudio Support
- 25.5×25.5 M2 Soft Mounting- Antenna Retention
- Removable Shielding Box- 32.5×32.5mm(29x29mm inner)
- 4.5grams/4mm Thickness (without shielding)
Package
- 1 x Happymodel Moblite7 HDZero 1S 75mm Brushless HD FPV Whoop Drone -ELRS
- 1 x Moblite7 Spare Canopy
- 1 x Gemfan 1610 propeller Set (4cw+4ccw)
- 1 x Propeller disassemble tool
- 1 x Screwdriver
