H7 based 30 x 30 flight controller with full graphic OSD
The Flight controller you can use 2 4-in-1 ESCs for an octocopter. Holy mother of FPV! It comes with cables and connectors to easily make your own wiring harness.
RADIX 2 Revision 1.2
- Improved barometer: Omron 2SMPB-02B
- TVS diode (“spike protector”) to protect 5 V regulator from voltage spikes
- Removed VTX pit switch over-current protection. Pit switch can supply up to 1.5 A
- Made in Oregon, USA
Specifications
-
New Processor: STM32 H7 processor running at 480 MHz with 1 MB RAM
-
New Gyro: New Bosch Sensortec BMI270 gyro / accelerometer delivering superior flight performance
-
New Baro: Latest generation Bosch Sensortec BMP388 or Omron 2SMPB-02B barometer for accurate altitude readings
-
Better OSD: Improved full graphical on-screen-display (OSD) with gray levels and transparency
-
Dual camera input: Camera can be switched using a switch on the RC transmitter
-
VTX pit switch: to turn on/off the video transmitter. Voltage for VTX can be 5 V or the battery voltage.
Note: The original RADIX 2 had over-current protection for the pit switch, which was removed in hardware revision 1.2 released in 2022.
-
32 MByte built-in flash memory: 30 MByte available for logging and settings storage
-
Driverless flashing with the BrainFPV USB mass storage bootloader. Simply copy the firmware file to the flight controller when connected to your computer. No more messing with DFU drivers
-
RGB status LED with customizable color
-
8 motor outputs: all supporting bi-directional DSHOT for RPM filtering. All outputs are available on connectors for easy connection of one or two 4-in-1 motor controllers (ESC’s).
-
6 serial ports (UARTs): all with integrated inverters for S-BUS and other inverted protocols
-
I2C port for external sensors
- RGB LED output
- Buzzer output
-
Camera control output for configuring analog cameras
- Analog RSSI input
-
5 V regulator with 1.5 A output and up to 8S (35 V) input voltage
- USB Type-C connector
- Size: 37 x 37 mm (30.5 mm hole spacing)
- Weight: 7g
Includes
- RADIX 2 flight controller
- Sweet stickers
- Silicone anti-vibration grommets 4x
- 5-pin cable for motor outputs 5 to 8
- BrainFPV 4-in-1 ESC cable kit (cables and connectors to make a cable that works with any 4-in-1 ESC with a JST-SH 7 pin, 8 pin, or 10 pin connector)
How to use the RADIX 2, make sure to read the manual.
