Designed for the Shendrones Siccario (V1 and V2) and Fenster cinelifter frames. This heatsink kit is specially recommended for builds using 3D printed TPU skirts all around, water sealed, where heat dissipation is a must to ensure good performance of the electronic components such as 4in1 ESC and DJI FPV Air Unit or Caddx Vista. By being anodized, these heatsinks are electrically non-conductive, protected against corrosion, resistant to wear and look sicc!
The kit includes 2x heatsinks. The long version is to be placed under the DJI FPV VTX and 4in1 ESC on the bottom plate, while the short version is for the 2nd 4in1 ESC. We recommend using double sided thermally conductive adhesive tape to secure the DJI FPV VTX to the aluminum piece in order to transfer the heat through while keeping the component in place. We also recommend using thermal paste or pad in between the 4in1 ESC and the aluminum heatsink, enough for making contact and allowing the heat to be transferred down towards the bottom of the carbon fiber plate. Hardware required: M3 screws, the length depends on how you build your stack. For double stack, you will want to use at least M3x20 screws.
- Weight: 29g
- Base Height: 1.5mm
- Total Height: 6mm