Features
AVATAR DIGITAL HD FPV KIT
Product features:
1080P resolution, 22ms low latency, Canvas mode
, 4km range, Dual antenna, Light weight design, FOV170°, Built-in 8G storage, 6V-25.2V
1080P/60FPS,720P/120FPS
The Avatar HD system uses H.265 code,an industry-leading technology,
to provide 1080p FPV image quality with ultra-low latency.
Dual-antenna Design,4km Long Range
Designed to carry dual antennas to achieve more stable and powerful signals.
Single Board Design,16g Light Weight
VTX weights only 16g,designed with single board and 25.5*25.5mm
mounting hole distance,making installation easier.
22ms Low Latency
Supports both high frame rate and standard frame rate,
in high frame rate,it has an average latency of 22ms.
8G Built-in Storage
The Avatar vtx comes with 8g built-in storage it can record 1080p or 720p
HD flight videos without interference.
HD 1080p OLED Dual Micro Displays
Canvas Mode
Supports betaflight full OSD display,
you can easily adjust the parameters you want by remote control.
Mini Size,46°FoV
The Avatar goggle is designed as lightweight mini
size and 46field of view,allowing pilots to wear it more
comfortably while giving them a more immersive FPV
experience as well.
Focus Adjustment
The goggles have the feature of adjusting the focus without the need to install
corrective lenses.
HDMI Output
Ranging Mode
Turn on the ranging mode to display the distance between the drone
and goggles in real time,in case the drone is lost due to long distance flight.
It is recommended to use a regulated power supply for power supply. If you use a 6S battery, be sure to install a capacitor at the battery input It is recommended to use the specifications above 50V/47uF, the voltage ripple is higher than 35V, and the risk of burning the device is high.
Specifications
Camera
| Model |
Avatar nano/Avatar camera |
| Image Sensor |
1/2.7”1nch |
| Resolution |
1080P/60fps,720P/120fps,720P/60fps |
| Ratio |
16/9 4/3 |
| Lens |
2.1mm |
| FOV |
170° |
| Aperture |
F2.0 |
| Shutter |
Rolling shutter |
| Min. Illumination |
0.001Lux |
| Weight |
3.5g |
| Dimensions |
14*14*17mm |
| Coaxial Cable |
90mm |
VTX
| Model |
Avatar module |
| Communication Frequency |
5.725-5.850GHz |
| Transmitter Power (EIRP) |
FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;
MIC:<25dBm |
| 1/O Interface |
JST1.0*6(Power in)JST1.0*4(USB) |
| Mounting Holes |
25.5*25.5mm |
| Dimensions |
33*33*9.5mm |
| Storage |
8G |
| Recording |
1080p/720p |
| Weight |
16g |
| Operating Temperature |
-20-40℃ |
| Channels |
8 |
| Wide Power Input |
6V-25.2V |
| Supported FC System |
Betaflight |
| OSD |
Canvas mode |
| Latency |
Average delay 22ms |
| Antenna |
2(IPEX) |
VTX Antenna
| Model |
Polar antenna |
| Polarization |
LHCP |
| Bandwidth |
5.6GHz-5.9GHz |
| Average Gain |
2dBi |
| Radiation Efficiency |
≥98% |
| VSWR |
≤1.4 |
| Connector |
U.FL |
| Line Length |
90mm |
| Dimension |
H105mm*R11.2mm |
| Weight |
1.5g |
Includes
- 1x Avatar HD Nano Kit
-
1x 4 Pin USB Cable
-
1x 6 Pin Power Cable
- 2x M2x3/4/5mm Screws
-
2x M1.2x1.5mm Screws
- 1x 14-19mm Bracket
